- 您现在的位置：买卖IC网 > Sheet目录536 > X3C19E2-20S (Anaren)COUPLER 90DEG 1700-2000MHZ 20DB
Model X3C19E2-20S
REV C
Mounting
Coupler Mounting Process
In order for Xinger surface mount couplers to work
optimally, there must be 50 ? transmission lines leading
to and from all of the RF ports. Also, there must be a
very good ground plane underneath the part to ensure
proper electrical performance. If either of these two
conditions is not satisfied, insertion loss, coupling, VSWR
and isolation may not meet published specifications.
Overall ground is improved if a dense population of
plated through holes connect the top and bottom ground
layers of the PCB. This minimizes ground inductance
and improves ground continuity. All of the Xinger hybrid
and directional couplers are constructed from ceramic
filled PTFE composites which possess excellent electrical
and mechanical stability having X and Y thermal
coefficient of expansion (CTE) of 17-25 ppm/ o C.
When a surface mount hybrid coupler is mounted to a
printed circuit board, the primary concerns are; ensuring
the RF pads of the device are in contact with the circuit
trace of the PCB and insuring the ground plane of neither
the component nor the PCB is in contact with the RF
signal.
Mounting Footprint
To ensure proper electrical and thermal performance
there must be a ground plane with 100%
solder connection underneath the part orientated as shown
with text facing up
The process for assembling this component is a
conventional surface mount process as shown in Figure
1. This process is conducive to both low and high volume
usage.
Figure 1: Surface Mounting Process Steps
Storage of Components: The Xinger II products are
available in either an immersion tin or tin-lead finish.
Commonly used storage procedures used to control
oxidation should be followed for these surface mount
components. The storage temperatures should be held
between 15 O C and 60 O C.
Substrate: Depending upon the particular component,
the circuit material has an x and y coefficient of thermal
expansion of between 17 and 25 ppm/°C. This coefficient
minimizes solder joint stresses due to similar expansion
rates of most commonly used board substrates such as
RF35, RO4350, FR4, polyimide and G-10 materials.
Mounting to “hard” substrates (alumina etc.) is possible
depending upon operational temperature requirements.
The solder surfaces of the coupler are all copper plated
with either an immersion tin or tin-lead exterior finish.
Solder Paste: All conventional solder paste formulations
will work well with Anaren’s Xinger II surface mount
components. Solder paste can be applied with stencils or
syringe dispensers. An example of a stenciled solder
paste deposit is shown in Figure 2. As shown in the
figure solder paste is applied to the four RF pads and the
entire ground plane underneath the body of the part.
.450
[11.43]
Multiple plated
thru holes
to ground
.025
[0.64]
.090
[2.29]
4X 50 ?
Transmission
Dimensions are in Inches [Millimeters]
XC09E2-20S Mounting Footprint
Line
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Available on Tape and
Reel for Pick and Place
Manufacturing.
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
X3C19P1-03S
COUPLER 90DEG 1700-2000MHZ 3DB
X3C19P2-03S
COUPLER 90DEG 1700-2000MHZ 3DB
X3C19P2-30S
COUPLER 90DEG 1700-2000MHZ 30DB
X3C21P1-03S
COUPLER 90DEG 2000-2300MHZ 3DB
X3C21P2-03S
COUPLER 90DEG 2000-2300MHZ 3DB
X3C26P1-03S
COUPLER 90DEG 2650-2800MHZ 3DB
X3C26P1-30S
COUPLER 90DEG 2650-2800MHZ 30DB
X3DC07E2S
DOHERTY COMBINER 728-768MHZ SMD
相关代理商/技术参数
X3C19E2-20S-CT
制造商:Anaren Microwave 功能描述:RF DIRECTIONAL COUPLER
X3C19E2-20S-R
制造商:Anaren Microwave 功能描述:RF DIRECTIONAL COUPLER
X3C19F1-03S
功能描述:COUPLER HYBRID 1700-2300MHZ 制造商:anaren 系列:* 包装:剪切带（CT） 零件状态:在售 封装/外壳:4-SMD，无引线 供应商器件封装:- 标准包装:1
X3C19F1-03S-R
制造商:Anaren Microwave 功能描述:RF HYBRID COUPLER
X3C19F1-03S-R5
制造商:Anaren Microwave 功能描述:RF HYBRID COUPLER
X3C19F1-20S-R5
制造商:Anaren Microwave 功能描述:RF DIRECTIONAL COUPLER
X3C19P1-03S
功能描述:信号调节 1700-2000MHz IL:.22dB VSWR:1.30
RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel
X3C19P1-03S-CT
制造商:Anaren Microwave 功能描述:RF HYBRID COUPLER